Home   |  About Us  |  Composite Products  |   Fumigation Products   |   Contact us       
Neotech Inspection & Chemical Co.,Ltd.
Vacuum Bagging Bagging film, Peel ply, sealant tape etc 
    
Neotech Composite Co.,Ltd.
139 Soi Phrayasuren 30, Phrayasuren Rd., Bangchan Klongsamwa Bangkok 10510 Thailand
Tel : (662) 5174955-6 Fax : (662) 5174957 Mobile 086 3746588, 086 3152433, 086 3052248, 086 3108566
Download company catalog : Products list , Ligth RTM Honeycomb , Tooling resin

We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.


We have retails and whole sells of our products all in Thailand country.


DiatexLink
Download catalog Diatex 2015


SPECIFIC SYSTEM


SYSTEM OPTIMISED BY DIATEX

 

Vacuum Moulding or Vacuum Bagging Composites
Vacuum moulding of composite materials involves using a number of vacuum consumables that have an effect on the production and quality. Some of these are used in successive layers, such as peel ply, perforated film, breather felt, and vacuum-bagging film. Standard procedures involve applying each one separately (e.g., peel ply, perforated film, breather felt), which can be difficult, especially when moulding is done against a vertical mould

Diatex has designed a specific range of bagging materials for prepregs and hand lay-up composite materials with vacuum polymerisation.

The success of Diatex is based on the manufacture of innovating products, such as Vacuopeel, Vacuoplex MP and Vacuolease, whose purpose is to facilitate the application of environmental products by users during drape moulding operations.

Diatex also offers all standard environmental products as well as the equipment which is used in this manufacture process in compliance with our quality system.

Diatex R&D department : working towards innovation. From the manufacture of technical textiles to the design of vacuum systems, Diatex has developed its research activities by recruiting specialists and reinvesting a significant percentage of its turnover into the implementation of new processes.



Vacuum Infusion Composites

Diatex has designed a range of bagging materials for vacuum infusion, a transformation process which is often employed in boat industry and wind turbine sector.

Positioned at the forefront of technology, Diatex is constantly developing new solutions for increasing the productivity of market operators. The INFUPLEX product is the perfect answer as it consists of a bleeder and separated film.

Diatex provides a whole range of ecological products and the vacuum equipment required for the infusion process in compliance with our quality syetem.

Diatex R&D department : working towards innovation. From the manufacture of technical textiles to the design of vacuum systems, Diatex has developed its research activities by recruiting specialists and reinvesting a significant percentage of its turnover into the implementation of new processes.

Some of these are used in successive layers, such as peel ply, perforated film, net bleeder, and vacuum-bagging film. Standard procedures involve applying each one separately (e.g., peel ply, perforated film, net bleeder), which can be difficult, especially when moulding is done against a vertical mould (spray glue is required). This type of procedure can result in overlapping on very large parts, or even the omission of a layer. Overlapping can cause deformation on thin parts, creating weak areas, or it can affect the porosity of subsequent layers.                

Vacuum Moulding and Infusion Product


NEO SHEET

Bagging film are recommended for moulding of elaborate forms for protection air pass between inside and outside of mould. Advantages are good machanical and chemical resistance, important elonggation rate, non porous, cost effective.

Neosheet 60 micron PE+Nylon+PE Local packing : width 1.88 meter x length 100 meter per roll temperature resistance 120 C

Download specification

 

 

BF 120

 

BF 120 Thickness 65 micron Nylon+PP+Nylon China : width 4.00meter and 6 meter x length 100 meter per roll temperature resistance 150 C

Download specification

PO 180

Bagging film PO180 : Diatex France Download specification
Packing :
width 2400 mm x 100 m

PO180 is an advances nylon copolymer film. PO180 is a multilayer extruded nylon film providing multilayers of safty. PO180 is strong, has a high elongation and is suitable for cure temperatures up to 180 C.

PO 180 The new nylon bagging film Ref. PO180 limits waste. Used for vacuum moulding, 50 micron of PO180 is equivalent to 75 micron traditional film. It is available in lay-flat tubing and sheet.

PO180 is suitable with polyester and epoxy resins, its composition based on polyamide and polypropylene provides good mechanical and chemical properties.


DRIAKO


FMB 100P-1200


FMK 120E-2000

Flow Media Net Breather  are recommended for the polyester or epoxy infusion with vacuum process. The porosity of those net bleeders is calibrated.

DRIAKO 105 g/m2 PE Knit Diatex France
Packing : width 2.00 meter x length 100 meter per roll

 

 

FMB 100P-1200 120 g/m2 PE Knit China : Good resin flow for flat surface panel
Packing : Green color width1.20 meter x length 100 meter per roll, temperature resistance 120 C

Download specification

 

 

FMK 120E-2000 120 g/m2 PE Knit China : flexible breather for curve part
Packing Black color width 2.0 meter x length 100 meter per roll, temperature risistance 120 C

Download specification

Breather  Non woven breather made of polyester fibres. There is recommented for the moulding of elaborate forms

PB 150 150g/m2 China Packing : width 1.50 meter x length 100 meter per roll

Peel ply  Those fabrics are used to impart a textured surface to the moulded component to improve adhesion in secondary boning or painting.

PA 66-85 RS 80 g/m2 white with red stripe Nylon 66 China Packing : width 1.50meter x length 100 meter per roll

Download specification

PA 80 80 g/m2 white with red and green sytrip Nylon 66 Packing : width 1.61m,eter x length 100 meter per roll

Perforated Film are films have a good chemical and thermal resistance for release films with a large range of resins.

PRF 120-1350 P1 RED 20 micron red CoPolymer PE Packing : width 1.35 meter x length 400 meter per roll , temperature resistance 120 C, thickness 35 micron

Download specification

Sealant tape are used to from a seal between the vacuum bagging film and the moulding tool surface. Sealant tapes compatible with most bagging films.

SM 5127 Diatex France Gray 205 C Packing : thickness 3.2,mm x width12.7 mm length 7.62 meters per roll, 40roll per carton

ST 150 Chaina Black 180 C Packing : thickness 3 mm x width 12mm length 15 meters per roll, 10 rolls per carton

Omaga Profile  resin flow channel employed and prepreg processes ช

OE 18 Lintex China White Packing length1 meter per peice

Flat Flow Media DIADRAIN is a flat resin or vacuum channel.It consists of a three-dimentional polyester filament core structure wrapped in a non woven polyester sleeve.

Color white, Max service 80 C thickness 4 mm width 50 mm weight 35 g/m leangth 100 meter

Download catalog

PE Tube feeding channe; for resin in vacuum infussion, LRTM and prepreg process

E10 Polyethylene 10 mm ID Packing : Length 100 meter per roll

E12 Polyethylene 12 mm ID Packing : Length 100 meter per roll

PE Spiral Warp flow channel for resin in vacuum infusion and prepreg process

Packing Length 100 meter per roll


Vacuum pump The automatic vacuum pumps, are perfectly adapted for to composite industry : vacuum moulding, vacuum infusion and RTM


Description motor vacuum pump 3/4 hp tank air size 35 liters with vacuum gage and digital electronic control valve and lighting show status of working and setting pressure unit in 6 types KPa, Mpa, Kgs/CM3, Bar, PSI, mmHg, inHg and inlet open-close valve in roller wheel for comfortable moving

Download specification :

Catchpot : resin trap for vacuum infusion and LRTM process

Application:To trap resin excess to vacuum pump in standless steel container with glass view lid and a inlet connection for pipe ID 10 mm and a connection with valve control for vacuum pump and vacuum pressure gage,

Packing container resin size 1 lit and 2 lits and 20 lits capacity of packing 1 set


T connector :

TCL 10 Brass : OD 10 mm local packing 20 peices per bag

TC10 Plastic China : OD 10 mm and 12 mm packing 10 peices per bag

TC10 Plastic Diatex France : OD 10 mm packing 25 peices per bag


Valve Tap

IV 10 with red valve grip Lintex China OD 10 mm 10 peices per bag

V 10 with black valve grip Diatex France OD 10 mm 10 peices per bag

INFUTAC High Strength Moulding Spray Adhesive

INFUTAC is an infusion adhesive specifically designed to hold reinforcing fibers in place.

  • Used for Infusion. vacuum moulding or RTM.
  • Safety Fuses Laminating Materials to Structural Core Surfaces
  • Provides Superior Holding During Forming Process
  • Allows Resin to Obtain Maximun Tensile Sheer Strength
  • Low Shrinkage in Curing
  • Fine Mist Adhesive with green tracer for accuracy in application
  • Fast Tack
  • HAPS Free

Packaging : Aerosol 610 ml - 425 g Download catalog

 
 

Infusion box Fixing the resin flow tube and connecting omega profile or spiral tube. Mainly used in vacuum infusion and prepreg process.

Packing 10 peices per box

 
 

 


Vacuum plug, Vacuum regulator, Vacuum Valve

Vacuum plug system  adapted to the vacuum moulding technology. The new vacuum plug help to save time and avoid leakage problems.

New Vacuum Plug advantages:

-Auto Perforating System (there is no need to perforate the bagging film upstream)
-Unblocking System (the operculum made by the perforation will not block the vacuum and there is no need to remove it)

In order to avoid the pressure losses on the vacuum level, it is imperative to use the adapted interior diameters of pipe 

 
 

Wing seal Black neoprene Code : RD476-003 Diatex France

Wing seal for use as vaccum seal where rim of flanges mould to hold vacuum pressure of flange. The seal is black neoprene

Packing : 25 meter per roll

 

 
 

Standard Dynamic Seal White Code : RD421-001Diatex France

Dynamic seal for use as a resin seal in RTM or Light RTM moulds, to reduce seal drag when closing the mould where flanges are too steep for conventional seals. The seal inflated or collapsed under vacuum using seal.

Control unit possibility to do the vacuum inside thanks to the installation kit CO-RD20-2056

Packing : 25 meter per roll

 
 

 

 

 

Neotech Composite Co.,Ltd.
139 Soi Phrayasuren 30, Phrayasuren Rd., Bangchan Klongsamwa Bangkok 10510 Thailand
Tel : (662) 5174955-6 Fax : (662) 5174957 Mobile 086 3746588, 086 3152433, 086 3052248, 086 3108566

Download company catalog : Products list , Ligth RTM Honeycomb , Tooling resin

We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.

We have retails and whole sells of our products all in Thailand country.


觫Թ Online
Composite Products
Axelplastics Stripper Cleaning Sealer and Mold Release agent      
Nidaplast Plastic PP Honeycomb     
Nord Composites  Tooling gelcoat and resin   
Diab Group PVC Foam, PET Foam, Balsa Core 
Lantor NV  Non Woven Polyester Soric Coremat   
Others Materials wax, mono, acetone, MEKP, cobolt etc
JB Martin Cabon Fiber Carbon fiber, Aramid fiber 
NJ Robinson  Spray resin and gel coat machine    
Fiber Glass Chopped strand mat, Roving, Woven roving etc
Resin & Gelcoat  Polyester, Vinylester, Epoxy resin
Vacuum Bagging Bagging film, Peel ply, sealant tape etc 
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
Home |About Us| Composite Products | Fumigation Products | Contact us
© Copyright 2016 All Rights Reserved. Best View With Internet Explorer , Mozilla Firefox1280x960 Resolution