Home   |  About Us  |  Composite Products  |   Fumigation Products   |   Contact us       
Neotech Inspection & Chemical Co.,Ltd.
Lantor NV  Non Woven Polyester Soric Coremat   
    
Neotech Composite Co.,Ltd.
139 Soi Phrayasuren 30, Phrayasuren Rd., Bangchan Klongsamwa Bangkok 10510 Thailand
Tel : (662) 5174955-6 Fax : (662) 5174957 Mobile 086 3746588, 086 3152433, 086 3052248, 086 3108566
Download company catalog : Products list , Ligth RTM Honeycomb , Tooling resin

We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.

We have retails and whole sells of our products all in Thailand country.

Lantor NL Link

Lantor Coremat®
The nonwoven core and liner for hand lay-up and spray-up processes

Coremat is a polyester nonwoven that contains microspheres and is used as at thin core (bulker mat) or print blocker (liner) in fibre reinforced laminated, manufactured in Hand Lay-Up or Spray-Up processes. Coremat should always be fully impregnated with resin.The microspheares in Coremat prevent excessive resin up-take. The most important resons to use Coremat are:

  • Weight saving
  • Resin and glass saving
  • Increase stiffness
  • Fast thickness build-up
  • Excellent surfase finish
 

Coremat Xi

ccc

Coremat Xi is the world standard for bulk mats. The Coremat resin consumption is about 600 grams per mm thickness. It contains a resin indicator which changes colour to show that resin has been applied to the Coremat.

Coremat Xi is very soft and pliable when it is wet and therefore very suitable for complex shapes.

Key properties Xi:

  • Resin indicator
  • Excellent impregnation
  • High drapeability in resin
  •  

     
     
           
     
    Coremat XM
     

    Coremat XM has a low resin take up: 500 gram of reain per mm thicknerss. It is therefore suitable for weight critical application . The hexagonal cell pattern resuls in a very consistent thickness in the product. Coremat XM has very good wet tensile strength properties; it is therefor often used in application where mats are pre-wetted outside the mould. Generally customers choose XM, because of its smoothness. ease of working, and resin savings. Key properties XM:

    • Honeycomb structure for
    • excellent drapeability
    • Extre resin saving
    • High wet strength
     
     

    spec coremat XM

           
     
      Use Coremat XM 10 replace plywood of regid materials like foam or plastic cores. Coremat has good secrew retention and does not have rot issues, unlike wood.
     
    Coremat XM10
     

    Lantor Soric® Flexible Core

    Core material and infusion medium in one

    Soric is a polyester nonwoven material with a compression resistant hexagonal (XF, SF, LRC) or random dot-printed (TF) cell structure. These pressure-resistant cells, which are separated by channels, contain synthetic micro-spheres.
    The cells do not absorb resin and therefore limit the total resin up-take. Since these cells are pressure resistant, they create thickness in the laminate even when pressure is applied by vacuum bag. The channels facilitate resin flow and form a pattern of cured resin with good mechanical properties and excellent bonding to the outer skins.

    Because of these unique properties and characteristics, Soric can be used as:

    • Thin core (bulker), adding stiffness, while reducing weight
    • Inter-laminar resin flow medium, eliminating the need for other (disposable) flow media
    • Print blocker (liner), that meets the most demanding cosmetic and finish requirements.

     

    Soric SF
         

    Soric SF is the general purpose grade, balancing resin flow and surface quality. Soric SF is therefore especially suitable for thinner laminates.

     

     
    Soric XF
         

    Soric XF maximises weight reduction in structural core applications. Soric XF offers the fastest resin flow for the lowest resin consumption, and is therefore ideal for thicker laminates.
    Soric TF

     

     
    Soric TF
         

    Soric TF is the ideal product for the most demanding cosmetic and surface finish requirements. Soric TF can be used as a core, but is most often used as a print blocker in infused laminates.

     

     
    Soric LRC
         


    Soric LRC is the latest grade in the Soric product line. Soric LRC has a resin uptake of about 350 g/m2/mm.
    Soric LRC is now commercially available in thicknesses of 1.5 mm, 2 mm and 3 mm.
    You will find our new products Lancore and FR-Soric under Products & Processes.

     

     

    Download Brochue All Products Range Lantor Composites "Coremat-Soric-Finishmat"
    Download Application Manual of Lantor Products
    Download Technical Properties of Soric
    Download Coremat Heat Resistance
    Download Thermal Insulation of Coremat
    Download Screw Holding Capacity of Coremat
    Download Certificate ABS (Coremat Xi)
    Download Certificate Lloyds (Xi)
    Download Certificate Lloyds (XM)
    Download MSDS of Coremat Xi
    Download MSDS of Coremat XM

    Technical data
     
    Coremat Xi
    Coremat XM
    Soric SF
    Soric XF
    Soric TF
        Xi 1 Xi2 Xi3 Xi4 Xi5 XM2 XM3 XM4 XM10
    SF2
    SF3
    XF2
    XF3
    XF4
    XF5
    XF6
    TF1.5
    TF2
    TF3
    Thickness mm

    1.4

    2 3 4 5 2 3 4 10
    2
    3
    2
    3
    4
    5
    6
    1.5
    2
    3
    Roll length m 130 80 50 40 30 80 50 40 15
    80
    50
    80
    50
    40
    30
    25
    100
    80
    50
    Roll width m 1 1 1 1 1 1 1 1 1
    1.27
    1.27
    1.27
    1.27
    1.27
    1.27
    1.27
    1.27
    1.27
    1.27
    Resin uptake kg/m2 0.8 1.2 1.8 2.4 3.0 1 1.5 2 6.5
    1.0
    1.3
    1.0
    1.4
    1.9
    2.4
    2.8
    0.8
    1.0
    1.4
    Dry weight g/m2 35 62 88 114 125 96 128 163 335
    130
    170
    130
    190
    260
    320
    375
    90
    115
    170
    Density impregnated kg/m3 630 630 630 630 630 540 540 540 680
    700
    600
    600
    600
    600
    600
    600
    700
    700
    700

     

    Typical machanical propertied of Lantor Coremat and Soric impregnated with unsaturated polyester resin
    Machanical properties
    Xi
    XM
    SF
    XF
    TF
    Test method
    Flexural strength
    MPa
    11
    8.5
    16
    8
    19
    ASTM D790
    Flexural modulus
    MPa
    1100
    1250
    1000
    800
    1500
    ASTM D790
    Tensile strength acroos layers
    MPa
    4
    4
    6
    4
    7
    ASTM C297
    Compression strength (10%strain)

    MPa

    10
    10
    4
    8
    4
    ISO 844
    Shear strength
    MPa
    5
    3
    6
    3.5
    7
    ASTM C273-61
    Shear modulus
    MPa
    35
    25
    40
    35
    34
    ASTM C273-61

     

    Lantor Composites in the marine market

    Naval

    Lantor core materials can be applied to all composite parts, including Cruise/ferry ships
    - interior panelling, floor, ceiling, seating, doors, decks, hulls, hatch covers, steering consoles, shower cabinets and chairs.
    Lantor Coremat® is used as a core material in decks and hulls or as a print barrier in hull sides.
    Lantor Soric® is used in closed mould processes as a flexible core, interlaminar infusion medium and print barrier.

      Typical key benefits from using Coremat or Soric:
    - Saves labor
    - Saves weight
    - Excellent print blocker
    - Saves resin and glass
    - Soric as an interlaminar infusion medium

    Lantor Finishmat® D7760 is used in closed mould processes to prevent print through effect and provide the laminate with a class-A finish. For additional information on print through blocking and osmosis prevention with Lantor Soric TF and Lantor Finishmat D7760

     

    Case studies in marine applications

    ....... Lantor Soric sailingboat
    Charger Composites is the manufacturer of the Bjorndahl 2.4 mR sailing boat. It is
    located in central Finland on the Gulf of Botnia, the boat building Mecca of Europe.
    The philosophy of the company is to build great boats that will last a lifetime!
    Download full details
      Lantor Soric in motor boat deck
    Conyplex in Medemblik is a very innovative company, and were the first boat builder
    in The Netherlands to use the vacuum infusion process. The boat shown was
    produced by Conyplex for Van Wijk in Woubrugge.
    Download full details
      Lantor Soric in marine boom
    Novis Marine, manufacturers of the C&C and Tartan line of performance and cruising sailboats in Fairport Harbor,
    Ohio, has successfully achieved the goal of an integrated mainsail storage system. It is achieved by engineering
    on stiffness with high end materials like Carbon fibre weavings in combination with epoxy resin and Soric XF
    core/infusion medium.
    Download full details
         
         

    Transportation

    Soric® Flexible Core is a core material (bulker), infusion medium and print blocker (liner) and is suitable for VI, RTM light, RTM Heavy and Pultrusion.
    Unique to Soric® Flexible Core is the combination of the following qualities:

    - Drapeability
    - Weight saving properties
    - Thin
    - Flow medium

    - design freedom
    - light construction
    - light construction
    - processing support
    All aspects of importance in composite applications of approximately 3 - 6 mm occur in the transportation market and its segments, namely:

    Automotive
    cars, sport cars, niche cars
    - panelling, spoilers

    Transport
    Truck, commercial vehicles, bus, RV
    - panelling, spoilers, skirts, floor, doors

    Mass Transit
    Trains, trams, light rail
    - panelling, seating, ceiling, floor, door

    Specialty
    Agricultural, sport & leisure, industrial
    - hoods, roofs, bonnets

    Case Study in Transportation
    ......

    Lantor Soric in Superbus project
    Lantor Soric will be used as core material in the dutch Superbus project. Lantor Soric suits perfect in this light weight full composite application.A new type of public transport is being developed in the Netherlands by the
    TU Delft which relies on lightweight composite construction and will be
    demonstrated at the Beijing Olympics in August 2008. In the search for a non-polluting, fast, economic and appealing new means of public transportation, a project has started in the Netherlands for the realisation of an electric vehicle called Superbus.

    Download full details

     

    Lantor Coremat in bus parts
    Fiberbus Brazil builds various bus parts, using spray-up, hand lay up and RTM Light production processes. In their open mould production they use Lantor Coremat to create extra stiffness in i.e. stairs, bus front-covers or parts where they need extra thickness for screwing in handle bars and grips 

    Download full details

     

    Lantor Soric in trailer floor
    Soric was used in the floor of a luxury trailer. The trailer is produced in South Africa for the Export market. Soricwas taken into the development of the trailer floor, in this way an optimal product could be designed. 

     Download full details

      Lantor Soric in Mack truck
    Marky Industries produces the bonnet of the Mack truck in RTM Light.
    Mack Trucks is one of the world's leading truck-manufacturing companies and is currently a subsidiaryof AB Volvo, Volvo Group
    Mack Trucks is a top producer in the vocational, onroad-vehicle market, Class 8 through Class 13. It is also the most popular manufacturer of heavy-duty off-road trucks in America. Parts for Mack’s righthand-drive vehicles are produced in Brisbane, Queensland, Australia, for worldwide distribution Download full details
         

     

    Aerospace
    Business jets, freight, passenger planes
    - interior panelling, focussed stiffening

     

     

    Case Study in Aerospace

       
    ..... Lantor Coremat and Soric in PAC – 750 XL aircraft
    Fibre Glass International produces parts for the PAC 750 XL aircraft (Pacific Aerospace Company) The design made its maiden flight in 2001.The PAC 750 received full US FAA certification in 2004. The type was targeted initially to the narrow market of skydiving. In the parachuting role, the high-lift wings and relatively high power to weight ratio enable the PAC 750 to take a load of parachutists to 12,000 feet (3,700 m) and return to land within 15 minutes.Download full details  

     

    Lantor Coremat in UAV

    The Aerostar Tactical Unmanned Air Vehicle System (TUAV) provides reliable, high quality real time intelligence gathering capability. The system was developed by the Company’s leading engineers in cooperation with the Israeli Intelligence Corps. The system has accumulated thousands of operational hours, giving the system its maturity, reliability and credibility. Among the system’s customers are the IDF, U.S. Navy, Angola and other customers around the globe.
    The Aerostar has a wing span of 7.5 m and uses Coremat XM to create the right stiffness needed for the wings, without adding o lot of extra weight. The wings are made of a carbon-epoxy system.Download full details  

         
       

    Neotech Composite Co.,Ltd.
    139 Soi Phrayasuren 30, Phrayasuren Rd., Bangchan Klongsamwa Bangkok 10510 Thailand
    Tel : (662) 5174955-6 Fax : (662) 5174957 Mobile 086 3746588, 086 3152433, 086 3052248, 086 3108566

    Download company catalog : Products list , Ligth RTM Honeycomb , Tooling resin

    We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.

    We have retails and whole sells of our products all in Thailand country.

    觫Թ Online
    Composite Products
    Axelplastics Stripper Cleaning Sealer and Mold Release agent      
    Nidaplast Plastic PP Honeycomb     
    Nord Composites  Tooling gelcoat and resin   
    Diab Group PVC Foam, PET Foam, Balsa Core 
    Lantor NV  Non Woven Polyester Soric Coremat   
    Others Materials wax, mono, acetone, MEKP, cobolt etc
    JB Martin Cabon Fiber Carbon fiber, Aramid fiber 
    NJ Robinson  Spray resin and gel coat machine    
    Fiber Glass Chopped strand mat, Roving, Woven roving etc
    Resin & Gelcoat  Polyester, Vinylester, Epoxy resin
    Vacuum Bagging Bagging film, Peel ply, sealant tape etc 
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
    Home |About Us| Composite Products | Fumigation Products | Contact us
    © Copyright 2016 All Rights Reserved. Best View With Internet Explorer , Mozilla Firefox1280x960 Resolution