Picture of Polyester tooling resin

Polyester tooling resin

RS-Polyester_tooling
Picture of Polyester tooling resin

RM 2000/50 is an unsaturated polyester resin, especially formulated for mould making filled and pre-accelerated, it is a ready to use product. Obtaining moulds with superior surface profile.

RM2000/50 have been desinged to polymerise at room temperature flollowing addition of MEKP
Rapid cure and rapid manufacture of the mould (in one day).
A easy to use product, pre-filled and pre-accelerated, with no future mixer required.
Filler : reduce the cost and improve rigidity of the mould

RM 2000/50 use resin and glass fiber ratio 4:1 with 1-1.5% catalyst MEKP

 

  • NORESTER® RM 2000 Polymerise at room temperature following addition of MEKP.
  • Pre-accelerated and promoted resin permits a rapid cure and rapid manufacture of the mould (in one day).
  • An easy to use product, with no further mixing required.
  • Filled resin.
  • Low shrinkage.
  • Perfect surface replication on the cured laminate.
  • Rapid cure and very good Barcol hardness.
  • Longer life than conventional GRP Moulds.
  • Speed of production cuts mould making costs.
  • Complete dimensional stability.
  • No settlement of the resin.
Category
Nord Composites
Supplier
Nord Composites
Process
Hand lay-upResin & Gelcoat
POLYESTER TOOLING RESIN
StatusNamePacking size
In Stock
RM 2000/505 KG
In Stock
RM 2000/5025 KG
POLYESTER TOOLING RESIN TECHNICAL DATA 1
NameCatalyst/HardenerProcessPre-acceleratedPromotedProcess timing
RM 2000/50MEKPHand Lay-up/Spray upRapid manufacture in 1 day
POLYESTER TOOLING RESIN TECHNICAL DATA 2
NameGel timePeak TemperatureViscosityFlexural strengthTensile strength
RM 2000/5030 - 40 minutes100 - 125°C1500 - 1900 cP141.3 MPa100 MPa

139 Phraya Suren 30 Alley Bang Chan Khlong Sam Wa Bangkok 10510 Thailand

(+66)2-5174955-6

© Neotech Composites 2021
Facebook QR
@neotechcomposite
Find us on Facebook
LINE QR
@neotech
Add us on LINE
© Neotech Composites 2021